High-performance, high-spreading rate lightweight tile adhesive based on tyre rubber powder, cement and special resins. Specifically designed to increase the noise reduction of surfaces by about 9 dB on 2 cm, for inside and outside, horizontally and vertically bonding with high deformability, specific for the construction of internal surfaces class C1E S2.
Product Overview
ISOLCOLL B40 NOISE STOP KOL08
✔️Tile Installation:
- Bonding tiles on floor
- Bonding tiles on wall
✔️Recommended For:
Waterproofing
Terraces and balconies
Bonding tiles on floor
Bonding tiles on wall
✔️Ideal For:
- EPS panels and for panels with addition of graphite
🧫Suitable Substrates:
cement based screeds and plasters, ready screeds, concrete, light-weighted screeds as ISOLPLANO 100 NOISE STOP
on gypsum-based screeds and plasters if treated with EMULSIONMIX
cementitious chips, grès, foamed concrete
walls in cement blocks
heating floors and cement-based waterproofing
- 🎯Performance Summary:
water used for mixing: add ≈ 50% of water on a 25 kg bag of ISOLCOLL B40 NOISE STOP consumption: 1 kg/m² depending on the trowel and the tile color: grey adjustability time: ≈ 50 minutes initial adhesion after 28 days: ≥ 1 N/mm² open time – 30 min.: ≥ 0.5 N/mm² sound abatement: ≈ 9 dB on 2 cm
Waterproofing
Terraces and balconies
Bonding tiles on floor
Bonding tiles on wall
Classification:
C1E S2 (EN 12004)
