Professional cementitious adhesive modified with high performance polymer, for horizontal and vertical bonding, both indoors and outdoors, of ceramic tiles, clinker and natural stone, also on plywood, even of large dimensions, with application thicknesses up to 15 mm, in compliance with ANSI A118.4E and ANSI A118.11 standards.
Product Overview
ISOLCOLL US20 COL57
✔️Tile Installation:
- Bonding tiles on floor
- Bonding tiles on wall
✔️Recommended For:
Waterproofing
Terraces and balconies
Bonding tiles on floor
Bonding tiles on wall
✔️Ideal For:
- EPS panels and for panels with addition of graphite
🧫Suitable Substrates:
supporting tiles, perfectly perpendicular masonry and actual masonry, properly cured and finished concrete
gypsum plaster, gypsum block or gypsum board (dry areas only – walls) if treated first with EMULSIONMIX
cured portland cement mortar, exterior grade plywood, plastic laminates, masonry surfaces
- 🎯Performance Summary:
water used for mixing: add approx. 26% of water on a part of ISOLCOLL US20 consumption: a 50-lb. bag covers about 75 to 90 square feet with a 1/4†x 1/4†x 1/4†notched trowel, and 55 to 65 square feet with a 1/4†x 3/8†x 1/4†notched trowel wall grouting: ≈ 12 hours floor grouting: ≈ 24 hours set to light foot traffic: ≈ 24 hours ready to use: ≈ 14 days adjustability time: ≈ 1 hour porcelain mosaic tile shear strength: ≥ 1.38 N/mm² glazed wall tile shear strength: ≥ 2.07 N/mm² quarry tile shear strength: ≥ 1.03 N/mm²
Waterproofing
Terraces and balconies
Bonding tiles on floor
Bonding tiles on wall
Classification:
ANSI A118.4E – ANSI A118.11
