Self-leveling colored mortar for flooring. High adherence, low elastic modulus, wear resistant, high workability, based on cement and special hydraulic binders, class CT C30 F7 A6.
Product Overview
PAVIMIX FF 200 PAV10
✔️Tile Installation:
- Bonding tiles on floor
- Bonding tiles on wall
✔️Recommended For:
Floor design
Floor for driveway use
Terraces and balconies
Cement design coatings
Cement furniture
Indoor floor
✔️Ideal For:
- EPS panels and for panels with addition of graphite
🧫Suitable Substrates:
cementitious and ready-to-use screeds
prefabricated or cast in situ concrete, aerated concrete
underfloor heating
excellent on cementitious waterproofings
good for overlaying on cement-based chips
even good on gypsum-based screeds if first treated with EMULSIONMIX
- 🎯Performance Summary:
water used for mixing: add approx. 20% of water on a part of PAVIMIX FF 200 pot life: 30 minutes consumption: 1.8-2 kg/m² per mm of thickness start setting time: ≈ 60 minutes fluidity or spreading (ring 30x50 mm): ≈ 140 mm set to light foot traffic: ≈ 20 hours color: colorful compression strength (28 days): ≥ 30 N/mm² flexural strength (28 days): ≥ 7 N/mm²
cementitious and ready-to-use screeds
prefabricated or cast in situ concrete, aerated concrete
underfloor heating
excellent on cementitious waterproofings
good for overlaying on cement-based chips
even good on gypsum-based screeds if first treated with EMULSIONMIX
Classification:
CT C30 F7 A6 (EN 13813)
